Pattern conveyor belt is the one where inclination angle is formed
between the working surface (the patterned cover rubber) and
non-working surface (planar cover rubber) and the belt carcass.
It can convey powdered, granulated and small lump materials at the
gradient of no more than 60°, it can also convey packaged materials
in order to preventing downslide of materials.
Feature: there is “chevron” pattern higher than the belt body on
the belt surface, the pattern can be open type or closed, each kind
of pattern can further be divided into three kinds—high, medium and
Application: suitable conveying of powdery, granular and small-lump
material at inclination angle of ≤40° or conveying of bagged
Feature: there is strip pattern higher than belt body on the belt
body in transverse direction, the pattern is divided into three
kinds—high, medium and low, each pattern can further be divided
into loose and dense etc. according the placing space.
Application: suitable for horizontal conveying of packages at
inclination angle of ≤30°. In case of trough, it can substitute
Feature: there is grainy pattern higher than the belt body or
recessed in the belt body on the belt surface, the recesses can
also be made into square hole, or prismatic and cloth grain lines.
raised grainy pattern is suitable for conveying of soft packages or
material needing holding power (e.g. carton) or slipless conveying.
Recessed grainy pattern is suitable for conveying granular material
at inclination angle of ≤45°.
there is half-sector (or 1/4 circle) pattern on the belt surface.
When the rubber belt is troughed, the pattern is closed into a
sector (or half-circle), it is of embossed pattern.
suitable for conveying powdery, granular and lumpy material at
large inclination angle of ≤60°. Suitable for conveying materials
at relatively large inclination angle. It is widely used in the
fields of coal, mining, electric power, metallurgy, chemical
engineering, light industry, grains, etc. for material conveying.